Blog

Engine oil pressure can be measured using a dedicated oil pressure gauge or a regular oil pressure gauge (with a range of approximately 1 MPa) with th

Push the equipment. There are usually two types. One is an iron table, a set of two. One is a bracket type jack, plus two side lifting brackets, the p

Choosing the right tools when changing transmission fluid not only improves efficiency but also ensures a high-quality change, preventing damage to th

Just as doctors rely heavily on stethoscopes, mechanics primarily use basic tools like OBD-II diagnostic tools. These quickly locate problems by readi

A high percentage of internal engine mechanical failures are combustion chamber sealing problems, such as improper intake and exhaust valve closure, b

High Precision and High Resolution: Accuracy reaches 0.5 grade, with a minimum reading of 0.001N, providing precise test results.

Instruments used for fuel injector inspection include fuel injection quantity testers, magnetic engine tachometers, oscilloscopes, and ignition tester

An exhaust back pressure tester is a device used to test the back pressure of an exhaust system. It is commonly used in industrial fields, particularl

The main materials for O-rings include nitrile rubber, silicone rubber, fluororubber, and EPDM rubber.

Although simple in appearance, a manual oil pump has a sophisticated internal design, mainly consisting of several key components: a piston, a cylinde

The main body adopts a segmented design, with a typical model (such as CS-32Y) consisting of a pump cylinder, piston assembly, and inlet/outlet oil pi

Regularly check the piston ring and cylinder clearance; replace the sealing components when wear exceeds 0.5mm. The recommended storage temperature is